lørdag 28. april 2012

Testing Espresso

Sorry for late update. We've been busy this past couple of weeks. I've been a short, but fantastic trip to Vilnius,Lithuania. And Kjell Sture has been busy with his yearly training in the Home Guard. Right now he is in Brønnøysund partisipating in f3f-competition. This weekend didn't fit with my work calender, so I had to stay here in Tromsø. I'm sure he will update you when he gets back.

Right before we both left for our different trips we had a perfect weekend flying our model aeroplanes. We even got to test the Espresso! We used bungee to start it. Kjell Sture testet it, I took pictures. It was mainly just to see that everything worked, since we didn't got to test the plane during Eastern in Lofoten. And it worked! Nothing was broken during the first flight. I can't wait until I can try it on a slope. We both agreed that it was not to wise for me to test it on bungee. I think that was a good decision.

We are ready for its first flight

And there it goes!

It's in the air

The day after ,we met up with some other model aeroplane enthusiasts living in Tromsø. Flying and having a good time. I flew my Multiplex EasyGlider, my best investment ever. :) It was a very nice day. And yes, we still have snow here in Tromsø...

Three men looking at the sky...I wonder what they are looking at...

søndag 15. april 2012

Recap of the Easter holidays

When we arrived in Lofoten at Kjell Stures parents there was a package waiting for me. My new 2.4 Ghz transmitter! It's a Futaba 8FG. Up until now I have used one of Kjell Stures old 35 mhz transmitters. Now that I have bought the Espresso and are planning to participate in f3f-competition, I needed to buy a new transmitter. The reason for choosing Futaba 8FG is beacause Kjell Sture has the Futaba FX20, and it will be much easier for him to only have one brand of transmitters to worry about. He will still have to do the technical parts for me a while longer, including programming the planes. The best part is that with the new transmitter I also got a free transmitter case! It feels like a little beautybag that I'm carrying around with me. :) Fits me perfectly! The transmitter is also great.

Me and my beautybag

When it comes to flying, the Easter holidays was not a success. As you might have read in an earlier post, the flying condions was bad because of heavy snowing. We didn't get to test the Espresso, unfortunately. The day we drove back to Tromsø it was beautiful sunny weather...it was just my bad luck. At least I got to fly the Multiplex EasyGlider 2 days. One of the days Kjell Sture and I had a landing competition. I'm very pleased that I managed to land only 2 meters from the mark, one time...

Kjell Sture by the landing mark.
- Annette -

lørdag 7. april 2012

Roadtrip continued.

After spendig the night at Jiri Baudis house, we visited his workshop the next day. He has a really nice workshop with the possibility to make prototype planes in a realtive short time. His way of building planes differs from the more common ways of building F3B planes, and the sparsystem he uses for the Fosa is very light with impressive strenght.

After visiting Jiri Baudis we drove through CZ and into Slovakia. Our destination for the day was a small city called Martin. This was our main destination for the trip and we had planned to spend four days there.

As some of you may know, I work in the UAS(UAV) industrie as a testpilot for a research company called Northern Research Institute. We have a close relationship with ET-Air that produces the Cruiser 1 & 2 airframes which is the basis for our Cryowing UAS. ET-Air has their main factory in Martin, Slovakia. I was there to visit the factory and see the technology first hand.

 Miro 2 cleaning the trailing edge of a Cruiser tailplane.

 Miro Majercik  and Espen Torp discussing the fitting of the fuel tank in a Cruiser 2 fuselage

After spending four long but very interesting days in Martin we started on the long drive back to Norway. On the way back we also had planned a few stops to meet people and see more workshops.

Our first stop on the way back was to visit Marian "Majo" Maslo. He is the winner of the 2008 Viking Race. He is also the designer and producer of the famous Acacia F3F planes and the later Air One series.

 Marian "Majo" Maslo with Air One wing mould.

After the visit with Marian, we drove a bit further and met up with anther famous builder, Milan Janek.

Milan Janek has been making one of the most long lived F3F/F3B designs ever, the Wizzard Compact. This is a plane that every pilot with respect for him/her self should have in the quiver. Milan has actually been making the Compact since 1995. Most newer designs sell for 2 or 3 years and then they are obsolete. The Compact is still a great plane, and on my "want-list." Only problem is that I want the original one-piece 2,5m wing, and my appartment and car is to small for that!

 Milan Janek and me with a Compact 2 wing.

After visiting Milan Janek we had planned to meet up with two more producers that day. First we stopped by Vaclav Vojtisek in a small town called Sloupnice. Vaclav is the maker of the Sting/Viking/Ascot/Dingo and now the Stinger planes. He is absolutely one of the best craftsmen in the industry and have some intersting new ways of making light and stiff wings. As an owner of a Stinger I`m a bit biased, but it is really excellent.

Vaclav and Espen talking about Espens new Stinger.

Only a short drive from Vaclav you find another small town called Sebranice. Here is where tha factory of Samba model is situated. We met up with one of the owners of Samba, Jaroslav Vostrel and had a better meal, since it also was my 29th birthday that day.

The next day we visited the Samba factory and got to see both the new Presision F3F/F3B and their new Perfection for F3J. I was amazed by the light weight of the Perfection wing panels, each weighing only 400 grams!

The next couple of days we did a lot of driving, but we found the time to stop by fullsize glider producer HpH Sailplanes and a quick stop at TUD-model, Dresden where I picked up my new Freestyler 3 from Franz Demmler.

Freestylers - If you can`t beat them....


onsdag 4. april 2012

A stormy maiden.

This Easter Annette and I are visiting my parents in Lofoten. While we are here, we have planned to maiden both Annettes Espresso and my VV Models Stinger. The weather reports has not looked promissing, and for the last couple of days we have walked through waist deep snow for hours to get to my home slope.

The first day we spent a couple of hours waiting in heavy snow and no wind. All we ended up with was wet planes and transmitters. The next day we woke up to sunshine and a fair amount of wind. Walking to the slope took a bit more than an hour and a half because of the deep snow. This is a walking trip that normaly takes only 20 minutes! We had to stop several times because of heavy snow showers that resulted in  very limited visibility.

Some time after we reached the slope edge, there was a brief moment when it stopped snowing and I quickly put my Stinger together and trew it of the edge. It took less than a minute before the sky closed again and I almost lost track of the Stinger. I quickly landed... We then waited for another 20 minutes before we decided that the conditions was getting worse and that we had to get back home.To bad we did not get to test the Espresso. The weather report for the rest of the week is not looking to good, but time will tell...